Routine Generator/Engine Maintenance - Miller Trailblazer 330 Diesel Owner's Manual

10-2. Routine Generator/Engine Maintenance

�
Use information displayed on the LCD display to assist in scheduling maintenance (see Section 10-1).
�
Engine speed is regulated by an electronic governor. Engine speed adjustments may only be performed by a Factory Authorized Service
Agent.
�
Follow the storage procedure in the engine owner's manual if the unit will not be used for an extended period.
Stop engine before maintaining.
�
See Engine Manual and Maintenance Label for important start-up, service, and storage information. Service Engine more often if used
in severe conditions.
�
Recycle engine fluids.
Maintenance Schedule
Fuel and Oil Check fuel and oil levels.
Clean any fuel and/or oil
spills.
Coolant Check coolant level.
Maintenance Check Maintenance screen
Screen for next oil change interval.
Fuel Con- Check
nections
Oil and Oil Change
Filter
Air Cleaner Change
Battery Clean
Terminals
Labels Replace any unreadable
labels.
Weld Clean
Terminals
Belt Check tension
Fuel Filters Change
Weld Cables Check cables for any signs
of damage and replace if
necessary.
Fan Belt Check
Radiator Flush coolant.
Radiator Check
Hoses
Air Cleaner Check
Hoses
Valve Check
Clearance*
Brushes* Check brushes and replace
if necessary.
Slip Rings* Check slip rings for any
signs of wear or damage.
Fuel Hoses Check fuel hoses and re-
place if necessary.
Fuel Check injectors and replace
Injectors* if necessary.
Coolant and Change coolant.
Hoses Check hoses and replace if
necessary.
*To be done by factory authorized service agent.
OM-291102 Page 62
Every Every
8 200
Hours Hours Hours
�
�
�
�
�
�
�
�
�
�
Every Every Every
400 1000
Hours Hours
�
�
�
�
�
�
�
�
�
Reference
2000
Section 5-5,
10-5
Engine Manual
Section 10-1
Section 10-5
Section 10-5
Section 10-4
Engine Manual
Section 10-5
Engine Manual
Engine Manual,
Section 10-5
Engine Manual
� Section 10-5
� Engine Manual
Engine Manual,
�
Section 10-5