Optional Excel Power; Simultaneous Weld And Power - Miller Trailblazer 330 Diesel Owner's Manual

8-3.

Optional Excel Power

8-4.

Simultaneous Weld And Power

Weld Current in Amperes At 30
Volts DC
300
250
200
150
100
0
OM-291102 Page 54
�
Complete Parts List is available at www.MillerWelds.com
1
Total Power Available in Watts
1500
3000
4500
6000
7500
10500
Excel power option provides generator
power at idle speed and while welding. This
allows most job site tools to operate properly
at engine idle speed.
Use GFCI protection when operat-
ing auxiliary equipment. If unit
does not have GFCI receptacles,
use
cord. Do not use GFCI receptacles
to power life support equipment.
1 120 V 20 A AC Excel Power Receptacle
This receptacle supplies 2.4 kVA/kW of pure
120 V, 60 Hz sine wave power at ALL engine
speeds.
Circuit protection is provided by CB4 only;
CB1 does not provide protection to Excel
power.
Combined output of all receptacles limited to
10.5 kVA/kW.
120 V Receptacle Amperes
13
20
20
20
20
20
GFCI-protected extension
240 V Receptacle Amperes
6
13
19
25
31
40