Table of Contents
Advertisement
4.2
Table of features
Series name
Type of door (bottom-hinged/sliding)
Opening type (manual / automatic)
Load 4 urine bottles
Load 2 urine bottles + 1 bedpan
Load 2 bedpans (double spray arm with rotation control) [BPW-2B]
Self-disinfection program (every 24 h)
Special application for removal of Clostridium difficile
A
setting 60 – 3000
0
Fitted for washing with universal rack
Bedpan washing spray arm rotation control
Fan-assisted cooling system with HEPA H14* absolute filter [BPW-DRY]
Steam condenser
Cold water connection
Hot water connection
The device must be complete with one of the two drain systems with trap available:
Wall drain trap
[BPW-DRAINWALL]
Floor drain trap [BPW-DRAINFLOOR]
P1 – Peristaltic detergent pump including flow sensor and jerry can level
monitoring [BPW-P1H]
P2 – Peristaltic descaler pump including flow sensor and jerry can level monitoring
Aquastop on water intake hoses
Drain trap blockage safety device
Chemical spill safety device
Automatic pump-out of remaining water at end of cycle
RS232 port (printer connection) [BPW-232PRINT]
USB port
LAN connection [BPW-LANI]
Additional PT1000 (3
rd
probe)
Non-customisable factory-set programs
Custom programs
Electrical main switch
Features specific to bedpan washers with automatic door opening:
Door closure anti-crushing safety device
Door opening obstruction safety device
Touchless sensors for rapid program start
Touchless sensors for door opening
Pedal button for door opening/closing
Emergency button
*
The device can be equipped with an optional steam removal system to limit the amount of steam in the chamber and
the moisture left on the load at the end of the treatment cycle.
This system, known as BPW-DRY, is not intended to completely remove all water residues from the processed load.
User Manual
193909105 rev.04
BPW1260
Bottom-hinged
Manual
BPW1260 – BPW4260
BPW4260
Automatic
13
13
7
10
-
-
-
-
-
-
Page 15 – 107
Advertisement
Table of Contents
