6.1.2 FIXING TO THE FLOOR
4 anchor bolts diameter 8mm can be used to fix the stand to the floor, fitting the screws in the 4 points shown
below. Once the "L" brackets have been fixed to the floor, secure them with the four retainer screws.
6.1.3 PLACING AND FIXING THE DEVICE ON THE STAND
Place the pallet next to the front of the stand and, making sure you have removed the screws which fix the
device to the pallet, slide the device onto the edge of the stand until the two rear edges are aligned.
User Manual
193909105 rev.04
BPW1260 – BPW4260
Page 35 – 107