SETUP menu items
CLO – Clostridium program enabling
Parameter which enables the user to run the
CLOSTRIDIUM program
This parameter can be modified by the engineer
and/or via WDConnect.
P1 and the relative flowswitch must be installed for
the "CLO" program to be enabled.
10.3
SETTING THE TIME – Clock Menu
Description
Hold down button P4 Functions and the display will
await the credentials which establish the level of
access, as described above: enter the level and
password.
To enter the specific Clock menu:
from the Setup, press the right button P4.
Press P5 to enter Clock edit mode: the word Clock
will now be underlined.
The digits flash while they are being edited:
increase and decrease using buttons P2 and P8.
Use buttons P4 or P6 to switch from setting to
minutes to hours. Confirm with P5 when done.
User Manual
Typical screens (guideline illustrations)
Illustration
193909105 rev.04
-
BPW1260 – BPW4260
Page 65 – 107