Smeg BPW4260 User Manual page 50

ICON MEANING – With cycle preselected
Dryer icon, for the preselected program:
indicates that the program includes
cooling at the end of the cycle, or simply a
cooling program.
Only illuminates if the dryer is installed
and enabled.
Start/Stop icon: indicates that the device
is ready for start-up.
Padlock icon. On (not flashing): door is
locked.
Icon off: door unlocked.
On (flashing): cannot lock door (door not
closed).
Heating element icon. Off.
Tank icon. Off.
Peristaltic pump icon. Off
Low detergent level. Change the jerry
cans. The type of additive will appear on
the second line of the display when the
user attempts to start the program.
Routine maintenance required.
On (not flashing): the number of cycles
after which maintenance is required has
almost been reached.
Flashing: the number of cycles after which
maintenance
reached.
Drying filter change required.
On (not flashing) without exclamation
mark: filter about to expire.
Flashing with exclamation mark: the
number of hours after which the cooling
filter must be changed has been reached.
User Manual
is required has
193909105 rev.04
MEANING – With cycle running
With drying in progress:
dynamic display.
With drying not in progress:
remains on (not flashing) if the program
includes cooling and the dryer is enabled.
With program running:
off
During reset: flashing
On (not flashing): door is locked.
Flashing combined with "DOOR OPEN".
On (not flashing): active when the steam
generator heating element is in operation.
Flashing only during final pump-out of the
tank.
Comes on when pump is activated, goes
out at end of current phase.
The second line specifies the dispensing in
progress:
the first two characters on the left identify
the active pump: P1, P2, P3.
\
On (not flashing): the number of cycles
after which maintenance is required has
almost been or has been reached.
(With cycle running: the icon remains on,
not flashing, to avoid confusion).
been
On (not flashing) without exclamation
mark: filter about to expire.
On (not flashing) with exclamation mark:
the number of hours after which the
cooling filter must be changed has been
reached.
BPW1260 – BPW4260 Page 50 – 107