Table of Contents
Advertisement
15.4.1 Power cable
Characteristics of the power supply cable supplied with the device.
-
H07RN-F 5 x 2.5 mm
-
H07RN-F 4 x 2.5 mm
-
H07RN-F 3 x 2.5 mm
16 WATER CONNECTION REQUIREMENTS
Legend of abbreviations used for the water intake connections.
CODE
INTAKE/DRAIN
CW
HW
D
16.1.1 WATER INTAKE
The device has 2 intake hoses, for cold and hot water.
The hoses are designed for connection to taps with 3/4'' gas threaded fittings.
Use the filters provided, "A" in the illustration, when connecting the hoses.
Notes:
-
If the hose is new or has been unused for a long time, before connecting it make sure that the water
is clear and free of impurities.
The characteristics of the intake water must comply with the requirements stated in the product's TECHNICAL
SPECIFICATIONS tables.
WARNING – MAINTENANCE OF WATER CHARACTERISTICS
Regular checks must be made (e.g. every 6 months/1 year) on the intake water to ensure that
the initial values are maintained, to allow the device or treatment system parameters to be
corrected if the characteristics change.
User Manual
2
(5G2,5), 450/750 V, (three-phase with neutral version)
2
(4G2.5), 450/750 V, (three-phase without neutral version)
(3G2.5), 450/750 V, (single-phase version)
2
INTAKE
Cold water hose – CW (cold water)
INTAKE
Hot water hose – HW (hot water)
DRAIN
Device drain hose – D (drain)
Fig. 3 – Fit the filters provided when connecting the intake hose.
193909105 rev.04
WATER TYPE
BPW1260 – BPW4260
Page 106 – 107
Advertisement
Table of Contents
