Smeg BPW4260 User Manual page 63

SETUP menu items Typical screens (guideline illustrations)
Prt – Printer type
The parameter sets the type of printer used for
production of the printed report when the printer is
installed.
PRt01 -> Custom (standard)
PRt02 -> Zebra ("PrinteInk")
MO – Overwriting of the internal memory
Possible values ON, OF.
ON: the memory is overwritten on a rotational
basis.
OFF: overwriting is prohibited and an alarm which
locks out the device is triggered when the memory
is full. The user has to download data from the
memory and free up space in order to start a new
cycle.
LD – Detergent dosage setting lock
With this parameter modification of the detergent
dosage by the superuser can be disabled, or the
superuser can be granted the option of changing
the dosages.
[Ld stands for Lock dosage].
Possible values: ON, OF
"LD ON": dosages are locked, the superuser cannot
modify the peristaltic pump dosages.
"LD OF": dosages are not locked, the superuser can
modify the dosages (default).
NT – LAN connection
This parameter refers to the presence or absence of
the component which allows connection of the
device to a network.
NT-OF (default): LAN connection absent.
NT-ON: LAN connection present.
It can only be modified by the authorised engineer.
DEM – Display Easy Mode
DEM: ON (default) display easy mode
DEM: OF – full display
TU – Temperature units
Default °C
Possible values °C / °F
Depending on the value chosen: the temperatures
are shown on the display.
It can only be modified by the authorised engineer.
User Manual 193909105 rev.04 BPW1260 – BPW4260 Page 63 – 107