Access To The Setup And Dependent Headings - Smeg BPW4260 User Manual

10.2

Access to the Setup and dependent headings

The first menu available is SETUP.
To access: press button "P5 confirm" – the word "SETUP" appears underlined. Selection buttons P4 and P6
can now be used to scroll the setup sub-parameters.
Only the menu items approved for the relevant access level can be viewed or edited.
Buttons P2 and P8 are used to edit the single values and p5 is used to confirm the new values entered.
There are two options for discarding the value entered without confirming it:
- move to the next / previous value using P4 or P6. If you move to the next value: it will be steady (not
flashing).
- press P4. One press on P4 exits the editing mode; press P4 again to access the Setup mode.
SETUP menu items
P1 – Dosage
Dosage in ml/litre associated to peristaltic pump
(OPTIONAL) PP1.
[With a decimal point for values from 0.0 to
10ml/litre.
P2 – Dosage
Dosage in ml/litre associated to peristaltic pump
PP2.
PU1 – Peristaltic user values
Parameter for deciding whether to use the P1
dosage values entered by the user or the
values entered in the programs
[ON– OF].
The default value is "OF": the device uses the values
entered in the parameters of the individual
programs.
If the value is changed to "ON": the device uses the
dosages as set by the superuser above.
PR – Printer (optional) language
The parameter sets the language in which the
printed report is produced when the printer is
installed.
Default is "EN" printout in English.
P2 and P8 scroll through the other languages
available:
IT, EN, FR, DE, ES, PT, PL.
User Manual
Typical screens (guideline illustrations)
-
default
193909105 rev.04 BPW1260 – BPW4260 Page 62 – 107