Optical Module - Ruijie RG-AP680-IO Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Table 1-11
LED Color
N/A
Green
Green
Green
1.6

Optical Module

The type of the port on the device directly connected with the 10G SFP port on the AP can
be an optical port or electrical port. However, the negotiated rate varies depending on
the port rate or optical module used on both devices. For details, see Table 1-11 and
Table 1-12.
Table 1-12
Optical
Port Rate
of the AP
10 Gbps
10 Gbps
10 Gbps
Bridge LED
No. of Steady-
Description
on LED
The AP does not enable the bridge function.
N/A
The AP has enabled the bridge function, but bridging fails.
Bridging is successful, and the strength of the wireless
1
signals dedicated for bridging is less than –70 dBm.
Bridging is successful, and the strength of the wireless
1, 2 signals dedicated for bridging ranges from –70 dBm to –50
dBm.
Bridging is successful, and the strength of the wireless
1, 2, 3
signals dedicated for bridging is greater than –50 dBm.
Rate Negotiation for an Optical Port on the Peer Device
Optical
Module Rate
1 Gbps
10 Gbps 1 Gbps
2.5 Gbps Not supported
1 Gbps 1 Gbps
Negotiated Rate Supported by the Port on the Peer
1 Gbps/10
Gbps/Auto
10 Gbps
Not supported
1 Gbps
12
Product Introduction
Device
1 Gbps/2.5 Gbps/10
Gbps/Auto
10 Gbps
2.5 Gbps
1 Gbps