Front Base Cover - GE LOGIQ 5 Service Manual

Hide thumbs Also See for LOGIQ 5:
Table of Contents

Advertisement

GE M
S
EDICAL
YSTEMS
D
2300000, R
IRECTION
EVISION
8-5-6

Front Base Cover

Purpose: This is a description on how to remove and replace the Front Base Cover.
8-5-6-1
Tools
Common pillips screwdrivers
8-5-6-2
Needed Manpower
1person, 15 minutes + travel
8-5-6-3
Preparations
Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 3.
8-5-6-4
Removal Procedure
1.) Remove the Left Cover. Refer to section 8-5-1 on page 39.
2.) Remove the Right Cover. Refer to section 8-5-2 on page 41.
3.) Unscrew four screws (1-4). Refer to Figure 8-54.
2
Right side
Figure 8-54 Unscrew 2 screws on the Right side
Chapter 8 Replacement Procedures
LOGIQ™5 S
(1)
(2)
(3), (4) are on the left side
M
ERVICE
ANUAL
8-49

Advertisement

Table of Contents
loading

Table of Contents