GE LOGIQ 5 Service Manual page 377

GE M S
EDICAL YSTEMS
D 2300000, R
IRECTION EVISION
8-11-1 Installing Base Software Load Image CD
11.)Insert the disk labeled "Base System Software Load Image Disk 1 of 2" into the CDROM drive.
12.)After restarting the system, when the following screen appears, press the Enter key to continue, to
abort remove the CD-ROM from the drive and press CTRL-C.
2
Figure 8-219 Warning Screen
Chapter 8 Replacement Procedures
LOGIQ™5 S
(cont'd)
M
ERVICE ANUAL
8-181