Op Panel Lcd Assy; Direction 2300000, Revision 2 Logiq™5 Service Manual - GE LOGIQ 5 Service Manual

GE M S
EDICAL YSTEMS
D 2300000, R
IRECTION EVISION
8-4-11

OP Panel LCD Assy

Purpose: This is a description on how to remove and replace LCD Assy.
8-4-11-1 Tools
• Common pillips screwdrivers
8-4-11-2 Needed Manpower
• 1person, 10 minutes + travel
8-4-11-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 3.
• Keyboard Assy should be removed before proceed. For more information, refer to KeyBoard Assy
on section 8-4-1 on page 15.
8-4-11-4 Removal Procedure
Refer to the OP PANEL LCD ASSY DISASSEMBLY on section 8-4-11 on page 35.
1.) Unscrew ten screws (1-10) from the LCD prefix bracket to remove it. Refer to Figure 8-42.
(2)
(3)
(4)
(5)
2
(6)
Figure 8-42 Unscrew 10 screws from the LCD brkt
Chapter 8 Replacement Procedures
(7)
LOGIQ™5 S M
ERVICE ANUAL
(1)
(8)
(9)
(10)
8-35