GE LOGIQ 5 Service Manual page 293

GE M S
EDICAL YSTEMS
D 2300000, R
IRECTION EVISION
8-7-4-4 Removal Procedure (cont'd)
6.) Disconnect one connector (1) if removing the FEC Assy. Otherwise skip this step. Refer to Figure
8-95.
7.) Move the upper and lower stopper in the direction indicated by the arrow (1). Refer to Figure 8-96.
8.) Pull out the board in the direction indicated by the arrow (2). do not bend it.
2
SIG Board
Figure 8-95 Disconnecting Cable
(1)
(2)
Figure 8-96 Pulling Out the Board.
Chapter 8 Replacement Procedures
(1)
LOGIQ™5 S M
ERVICE ANUAL
(1)
8-97