Installing Or Removing Air Shroud - Supermicro SuperServer SYS-511E-WR User Manual

Installing or Removing Air Shroud

The air shroud directs airflow to maximize cooling efficiency and comes pre-installed with
the system. In the rare event that the air shroud needs to be removed or installed follow the
procedure below.
Installing or Removing Air Shroud
1. Remove power from the system.
2. Remove the chassis
3. To install the air shroud, place the air shroud in the chassis. To remove the air shroud,
lift the air shroud out of the chassis.
Figure 3-14. Installing or Removing Air Shroud
Chapter 3: Maintenance and Component Installation
cover.
55