Installing Or Removing Drives - Supermicro SuperWorkstation SYS-751A-I User Manual

Installing or Removing Drives

Installing a Drive and Drive Tray
1. Use a tray that is compatible with the cage, and drop the drive into the tray.
2. Push the drive tray assembly into the cage until is snaps in.
Removing Drive and Drive Tray
1. Pinch the release handles and pull the drive tray from the cage.
2. Remove the drive from the drive tray.
Chapter 3: Maintenance and Component Installation
Figure 3-6. Installing Drive onto Tray
Figure 3-7. Removing Drive from Tray
49
Release
Handles