Turn Signal Relay; Main Relay - Honda LEAD 110 2009 Service Manual

TURN SIGNAL RELAY

INSPECTION
Before performing the inspection, check the follow-
ing:
– Battery condition
– Burned out bulb or non-specified wattage
– Burned fuse
– Ignition switch and turn signal switch function
– Loose connector
Remove the front center cover (page 3-4).
Disconnect the turn signal relay 3P connector from
the relay.
Short the turn signal relay 3P connector terminals of
the wire harness side with a jumper wire.
CONNECTION: Black/Brown – Gray
Check the turn signal light by turning the switch ON.
If the light comes on, the turn signal relay is faulty
or connector has poor connection.
If the light does not come on, the wire harness is
broken.

MAIN RELAY

REMOVAL/INSTALLATION
Remove the front center cover (page 3-4).
Remove the main relay from the relay (Black) con-
nector.
Installation is in the reverse order of removal.
LIGHTS/METERS/SWITCHES
TURN SIGNAL RELAY
TURN SIGNAL RELAY
3P CONNECTOR
3P CONNECTOR
TURN SIGNAL RELAY
3P CONNECTOR
TO
MAIN
RELAY
TURN SIGNAL SWITCH
MAIN RELAY
JUMPER WIRE
21-15