Headlight Dimmer Switch; Turn Signal Switch - Honda NPS50/S RUCKUS 2009 Owner's Manual

If your scooter is stopped with the ignition
switch ON and the engine stop switch
OFF, the taillight will remain on, resulting
in battery discharge.

Headlight Dimmer Switch

The headlight dimmer switch ( ) is used
to change between the high and low beams
of the headlight. To operate, turn the
switch to HI for high beam, LO for low
beam.
The turn signal switch ( ) is used to signal
a turn or a lane change. To operate, move
the switch all the way in the proper
direction and release it. The appropriate
1 turn signal lights will start blinking.
Remember to return the switch to the
center (off) after completing your turn or
lane change.
(1) headlight dimmer switch

(2) turn signal switch

(3) horn button
Controls & Features
Turn Signal Switch
(1)
(2)
(3)
Instruments & Controls
2
HI
LO
23