Brake Pad/Disc - Honda LEAD 110 2009 Service Manual

BRAKE SYSTEM

BRAKE PAD/DISC

BRAKE PAD REPLACEMENT
Push the caliper pistons all the way in by pushing
Check the fluid
the caliper body inward to allow installation of new
level in the master
brake pads.
cylinder reservoir as
this operation
causes the fluid
level to rise.
Remove the brake pad pin plugs.
Loosen the brake pad pins.
Remove the mounting bolts and remove the brake
caliper from the brake disc.
Remove the pad pins and brake pads.
17-8
CALIPER BODY
PAD PIN PLUGS
MOUNTING BOLTS
BRAKE PADS
PAD PIN
PAD PINS
BRAKE CALIPER