Honda LEAD 110 2009 Service Manual page 245

CYLINDER/PISTON
Install the new O-rings into the grooves of the water
pipe.
Insert the water pipe into the water pump/stator
base.
Apply engine oil to the cylinder and piston sliding
surface.
Apply engine oil to the piston rings.
Install the cylinder over the piston while compress-
Attach a piece of
ing the piston ring with your finger.
wire to the cam
chain to prevent it
from falling into the
crankcase.
Slide the water pipe into the cylinder.
Set the clips to the water pipe as shown.
Install the cylinder head (page 9-21).
10-6
O-RINGS
CYLINDER
CAM CHAIN
WATER PIPE
CLIPS
WATER PIPE
PISTON RINGS