Honda LEAD 110 2009 Service Manual page 147

FUEL SYSTEM (Programmed Fuel Injection)
Install the fuel pump unit/set plate to the fuel tank.
• Be careful not to damage the fuel level sensor
when installing the fuel pump unit.
• Be careful not to allow the dirt and debris
between the fuel pump and packing.
Install the fuel pump mounting nuts.
Tighten the fuel pump mounting nuts in the
sequence shown.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Connect the fuel pump 5P connector.
Connect the quick connect fitting (page 6-33).
INSPECTION
Check for fuel pump unit for wear or damage.
Check for fuel suction filter for wear or damage.
Replace the fuel pump unit if necessary.
6-38
FUEL PUMP UNIT/
SET PLATE
NUTS
(4)
(2)
(7)
(5)
FUEL PUMP
UNIT
(6)
(1)
(3)
FUEL PUMP 5P
CONNECTOR
FUEL SUCTION
FILTER