Honda LEAD 110 2009 Service Manual page 258

STARTER PINION
REMOVAL
• The starter pinion can be serviced with the
engine installed in the frame.
Remove the left crankcase cover (page 11-5).
Remove the starter pinion holder.
Remove the starter pinion.
INSPECTION
Hold the starter drive gear and turn the starter pin-
ion gear.
– When turned clockwise, the starter pinion gear
should rotate freely.
– When turned counterclockwise, the starter drive
gear should protrude smoothly as it rotates.
Check the pinion gear teeth and shaft for wear or
damage.
Check the starter drive gear teeth of the starter pin-
ion for wear or damage.
Check the starter driven gear teeth of the drive pul-
ley face for wear or damage.
DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
STARTER DRIVE GEAR
STARTER
PINION GEAR
STARTER
PINION GEAR
STARTER
DRIVEN GEAR
STARTER PINION
HOLDER
STARTER PINION
STARTER
PINION GEAR
STARTER
DRIVE GEAR
STARTER
PINION SHAFT
11-7