Standard Torque Values; Engine & Frame Torque Values - Honda LEAD 110 2009 Service Manual

STANDARD TORQUE VALUES

FASTENER TYPE
5 mm hex bolt and nut
6 mm hex bolt and nut
(Include SH flange bolt)
8 mm hex bolt and nut
10 mm hex bolt and nut
12 mm hex bolt and nut
ENGINE & FRAME TORQUE VALUES
• Torque specifications listed below are for specified fasteners.
• Others should be tightened to standard torque values listed above.
FRAME/BODY PANELS/EXHAUST SYSTEM
ITEM
Front fender mounting bolt
Floor panel mounting bolt
Exhaust pipe joint nut
Muffler mounting bolt
Exhaust pipe stud bolt
MAINTENANCE
ITEM
Throttle cable lock nut (Throttle
body side)
Air cleaner element screw
Air cleaner housing cover screw
Spark plug
Valve adjusting screw lock nut
Engine oil drain bolt
Engine oil strainer screen cap
Final reduction oil check bolt
Final reduction oil drain bolt
Equalizer connecting cable lock
nut
Headlight adjusting bolt
LUBRICATION SYSTEM
ITEM
Oil pump plate screw
Oil pump mounting bolt
TORQUE
N·m (kgf·m, lbf·ft)
5.2 (0.53, 3.8) 5 mm screw
10 (1.0, 7) 6 mm screw
6 mm flange bolt
22 (2.2, 16) (Include NSHF) and nut
34 (3.5, 25) 8 mm flange bolt and nut
54 (5.5, 40) 10 mm flange bolt and nut
THREAD
Q'TY
DIA. (mm)
4 6
4 6
2 6
2 10
2 –
THREAD
Q'TY
DIA. (mm)
2 8
4 5
7 5
1 10
2 5
1 12
1 30
1 8
1 8
1 8
1 4
THREAD
Q'TY
DIA. (mm)
1 4
2 6
GENERAL INFORMATION
FASTENER TYPE
TORQUE
N·m (kgf·m, lbf·ft)
10 (1.0, 7) Apply locking agent to the
threads.
7 (0.71, 5.2)
14 (1.4, 10)
59 (6.0, 44)
– See page 3-13
TORQUE
N·m (kgf·m, lbf·ft)
8.5 (0.87, 6.3)
1.1 (0.11, 0.8)
1.1 (0.11, 0.8)
16 (1.6, 12)
10 (1.0, 7) Apply engine oil to the
threads and seating surface.
24 (2.4, 18)
20 (2.0, 15)
13 (1.3, 10)
13 (1.3, 10)
6.4 (0.65, 4.7)
1.8 (0.18, 1.3)
TORQUE
N·m (kgf·m, lbf·ft)
3 (0.31, 2.2)
10 (1.0, 7)
TORQUE
N·m (kgf·m, lbf·ft)
4.2 (0.43, 3.1)
9 (0.92, 6.6)
12 (1.2, 8.9)
27 (2.8, 20)
39 (4.0, 29)
REMARKS
REMARKS
REMARKS
1-11