Standalone
Application Setup
The MediaPort 300 can integrate seamlessly into various applications. This section contains
instructions on how to set up the MediaPort 300 for a standalone application.
This application in this section is a sample configuration of the unit in a standalone
application. The application described gives a basic understanding of the MediaPort 300 in
a common application.
•
•
•
Overview
This section contains a general discussion of MediaPort 300 inputs and outputs and their
intended uses when the MediaPort 300 is used as a standalone device. All of the principles
described here are used in the application setup procedure that follows.
NOTE: Ensure the MediaPort 300 is set to Standalone audio mode in PCS before
Video Input and Output
HDMI Input
The HDMI Input can be from a camera, a computer, HDMI switcher, or other HDMI source.
The HDMI source can be a video conference or document camera without audio. The
source can also be a PC or switcher output that includes embedded audio. If the HDMI
input includes microphone audio, the HDMI audio should be muted.
MediaPort 300 HDMI and Audio to USB Scaling Bridge • Standalone Application Setup
Overview
Video Input and Output
Application Setup Example
beginning setup (see
General Settings Page
selecting Standalone audio mode).
on page 48 for more information about
63