2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
Figure 15.
Configuring MacOS
1.
2.
3.
4.
5.
6.
MediaPort 300 HDMI and Audio to USB Scaling Bridge • Installation and Basic Operation
Speaker Pop-up Menu and Selecting Output
for MediaPort 300
®
Connect a USB-C cable from the MediaPort 300 rear panel USB Host port to a USB
port on a computer running MacOS. The required drivers install automatically. A
message notifies you when driver installation is complete.
On the computer, click System Preferences > Sound.
If necessary, click the Sound
1
Effects tab (see
, at right).
Click Extron MediaPort 300 from
the Play sound effects through
2
drop-down list (
).
Click the Output tab (
3
).
Click Extron MediaPort 300 from
the Select a device for sound
output list (
4
).
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
4 4 4 4
4 4 4 4 4 4 4 4
4 4 4 4 4 4
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
4 4 4 4
4 4 4 4 4 4 4 4
4 4 4 4 4 4
5 5 5 5 5 5 5 5
5 5 5 5
5 5 5 5 5 5
>
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
24