Extron electronics MediaPort 300 User Manual page 52

2 Filter List and Parameters (see
Line 2 In inputs each have five slots for filters; HDMI and USB inputs have three. Each of
the slots allows for any of the available filters to be applied and adjusted. All parameters
for each filter can be adjusted in this list. Click the square in the Active column (
to engage the selected filter. A blue square in the Active column represents an active
filter. Filters are inactive by default. Available filters include:
• High pass
• Low pass
Bass (Shelving)
•
3 Show Filter Selection and Parameters — When this button is engaged (blue), the
filter drop-down menus and available parameters are visible. When disengaged, the
filters and parameters are hidden. Filters and parameters are visible by default.
4
Copy and Paste — Allows a filter type and parameters to be copied and pasted from
one slot to another.
Compressor
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 42. Input Compressor DSP Page
Compressor Graphic — Visually represents the compressor parameters and allows
1
adjustment of threshold and ratio by clicking and dragging the yellow dot handles.
Bypass button (engaged by default)
2
Compressor controls —Click and drag the sliders to adjust compressor attack and
3
release time or enter a value in the text fields.
Reset to Default — Resets all compressor parameters to default.
4
MediaPort 300 HDMI and Audio to USB Scaling Bridge • Product Configuration Software
figure 41 on page 43) — The Mic/Line 1 In and
• Treble (shelving)
• Parametric
2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
)
A
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
44