Table of Contents
Advertisement
Logo Configuration Page
The Logo Configuration page (see figure 49) contains controls for setting the response
for the behavior of the USB video output for no HDMI input signal and upon detection of
a HDCP encrypted input. This page also provides settings for the HDMI loop-out behavior
when HDCP content is present with a non-HDCP display.
NOTES:
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
Figure 38.
1
2
1
2
MediaPort 300 HDMI and Audio to USB Scaling Bridge • Product Configuration Software
Most common image file formats are accepted including png, jpg, bmp, and gif.
•
•
The maximum logo size is 4096x2160.
•
Logos are scaled to the current USB video output resolution.
•
512MB of storage is available for custom logos.
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
Logo Configuration Page
Images in Memory Panel
No Signal Tab and Panel
Images in Memory Panel — Click the Upload Image button and choose a file to
upload to the MediaPort 300 internal memory. A file must be uploaded to the internal
memory before it is assigned.
No Signal Tab and Panel — The No Signal logo controls are displayed on this page.
Use the radio buttons to configure the No Signal action for the USB video output. Click
and drag an image from the internal memory over the Image field to assign it as a logo.
Click Clear to clear the assignment. The image remains on the MediaPort 300 internal
memory.
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
3
HDCP Tab (see
page
40)
39
Advertisement
Table of Contents
