Extron electronics MediaPort 300 User Manual page 48

Streaming hdmi and audio to usb scaling bridge

Hide thumbs Also See for MediaPort 300:

Table of Contents

HDCP Tab (see

figure 38

on page 39)— Click the HDCP tab to select the HDCP panel

(see figure 39), which has controls similar to the No Signal tab. Use the radio buttons

to configure action for the USB video output when HDCP content is detected on the

input (see

on page 14). Click and drag an image from the internal memory over

the Image field to assign it as a logo. Click Clear to clear the assignment. The image

remains on the MediaPort 300 internal memory.

Logos are not supported on the HDMI loop out (

), which can be configured to either

display a black output or green output when HDCP content is present with a non-HDCP

display.

Figure 39.

Logo Configuration Page, HDCP Tab

MediaPort 300 HDMI and Audio to USB Scaling Bridge • Product Configuration Software

Table of Contents