Table of Contents
Advertisement
Network Panel
The Network panel (see figure 27,
be changed.
NOTE: The USB IP address is 203.0.113.22. This IP address cannot be changed. DO
NOT select DHCP or enter new network information.
To change the name:
Click EDIT in the Network panel. The
1.
editable fields are displayed (see figure 30).
2.
Click in the Device Name/Hostname field
and enter the desired device name.
3.
When finished editing, click SAVE to confirm
changes or CANCEL to close the window
without making changes.
Passwords Panel
The Passwords panel (see figure 27,
have been set and provides an option to set administrator or user passwords. It does not
display the actual passwords.
NOTE: The following rules apply to passwords:
Length is 1-128 characters.
•
•
All human-readable characters are permitted except |.
The password cannot be a single space.
•
•
Passwords are case-sensitive.
•
The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is extron.
To assign administrator and user passwords:
In the Passwords panel, click EDIT. The editable fields are displayed (see figure 31).
1.
Figure 31.
2.
Click in the Admin Password field and enter the new administrator password.
3.
Click in the Confirm Admin Password field and enter the password from the Admin
Password field.
To assign a user password, repeat steps 2 and 3 in the User Password panel.
4.
5.
When finished, click SAVE to set the passwords. To close the window without saving a
password, click CANCEL.
NOTE: Passwords can be changed but they cannot be removed entirely. The FOX3
must have passwords at all times. These fields cannot be blank.
on page 28) displays the device name, which can
4
) displays whether Admin and User passwords
5
Admin and User Passwords Panel
FOX3 T 101 Transmitter and FOX3 R 101 Receiver • Internal Web Page
Figure 30.
Network Panel
30
Advertisement
Table of Contents
