Equipment Mounting; Mounting The Transmitter And Receiver; Tabletop Use; Mounting Kits - Extron electronics FOX3 101 User Manual

Equipment Mounting

This section provides procedures for mounting the FOX3 T 101 transmitter and FOX3 R 101
receiver.

Mounting the Transmitter and Receiver

ATTENTION:
The 1-inch high, quarter-rack width transmitter and receiver can be placed on a table,
mounted in a rack, or mounted under a desk or table. The transmitter and receiver can also
be mounted on a projector bracket.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient
location.

Mounting kits

Mount the unit using any optional compatible mounting kit listed on the
in accordance with the directions included with the kit. For rack mounting, see
Mounting Guidelines
Installation and service must be performed by authorized personnel only.
•
• L'installation et l'entretien doivent être effectués par le personnel autorisé
uniquement.
on page 34.
FOX3 T 101 Transmitter and FOX3 R 101 Receiver • Equipment Mounting
Extron website,
UL Rack-
33