Table of Contents
Advertisement
Internal Web Page
The FOX3 T 101 transmitter and FOX3 R 101 receiver feature an internal web server,
displayed as a web page. This page allows you to monitor and adjust certain settings of the
FOX3 101 devices via a IP over USB connection. Use a web browser to view the pages on
a PC connected to the device USB port.
This section gives an overview of the internal web page, which is always available and
cannot be erased or overwritten. Topics in this section include:
•
•
Accessing the Internal Web Page
Access the FOX3 device internal web page as follows:
1.
2.
3.
4.
5.
6.
Accessing the Internal Web Page
Web Page Panels
Connect the FOX3 device to a PC using the front panel USB port (see
figure 7
on page 9).
Open a web browser on the PC connected to the device.
Enter the FOX3 transmitter IP address in the browser Address field.
NOTE: The USB IP address is 203.0.113.22. This IP address cannot be changed.
Press the <Enter> key on the keyboard. The web page password page opens.
Figure 26.
Network Password Prompt
The FOX3 is password protected. Enter a user name (user or admin) in the Username
field and the password in the Password field when prompted (see figure 26).
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron.
Click the Sign in button, if the unit is password protected.
FOX3 T 101 Transmitter and FOX3 R 101 Receiver • Internal Web Page
figure 6
and
27
Advertisement
Table of Contents
