Table of Contents
Advertisement
4.
Scroll down to the alphabetic navigation bar (see figure 10).
Figure 10.
Alphabetic Navigation Bar
5.
Click the appropriate letter to locate the software or firmware.
6.
Click Download and follow the on-screen instructions (see figure 11,
Figure 11.
PCS Software Download
For Firmware:
Figure 12.
Firmware Page with Alphabetic Navigation Bar
a.
Click the letter F from the alphabetic navigation bar (see figure 12,
b.
Scroll down the page to find the firmware for the FOX3 T 101 and FOX3 R 101.
c.
(Optional) Click Release Notes (
update.
d.
Click Download (
3
e.
Enter the required user information and click Download. An executable (.exe) file is
downloaded to the PC. Run this program to place the firmware on the PC for future
use. Make a note of the folder where the firmware file was saved.
7.
Install the software.
a.
Navigate to the folder where the software file was downloaded.
b.
Double-click the executable file and follow the on-screen directions to install the
software.
For Firmware:
To install via PCS, see Update Firmware in the
•
•
To install via the internal web pages, see the
FOX3 T 101 Transmitter and FOX3 R 101 Receiver • Configuration Software
) for more information about the firmware
2
). The product download screen opens.
Firmware Panel
for PCS).
1
).
1
Device Menu
on page 26.
on page 31.
20
Advertisement
Table of Contents
