Table of Contents
Advertisement
Firmware Panel
The Firmware panel (see figure 27,
and the date it was last updated. Update the firmware on the FOX3 101 from this panel (see
Software/Firmware Installation
To update firmware:
In the Firmware panel, click the SELECT
1.
FILE button (see figure 32).
In the Open dialog box, browse to locate
2.
the new firmware file on your computer (by
default the file is stored at C:\Program
Files (x86)\Extron\Firmware\
FOX3 T 101 after being downloaded from
the Extron website).
NOTE: Firmware files for FOX3 101
devices have an .eff extension. Do
not attempt to load any other file types.
3.
Double-click the firmware file name. The
Open window closes, and the selected
firmware file name appears in the Update
Firmware panel on the web page.
4.
Click INSTALL to begin. To cancel the
update, click the X button in the Update
Firmware panel.
During the updating process, a window appears in the middle of the screen, displaying
messages of the progress of the update: Initializing, Installing the Firmware,
and Rebooting Device.
When the update is completed, the message window closes and the message Firmware
Upload Complete appears near the top of the screen. The new firmware filename appears
beside Version in the Firmware panel.
on page 28) displays the current firmware version
6
on page 19 to download the firmware).
FOX3 T 101 Transmitter and FOX3 R 101 Receiver • Internal Web Page
Figure 32.
Firmware Panel
31
Advertisement
Table of Contents
