Date And Time Panel - Extron electronics FOX3 101 User Manual

Date and Time Panel

The Date and Time panel (see figure 27,
the date and time, current date, and time. There are three options to set the date and time:
manual mode, sync to NTP (Network Time Protocol) servers, and sync to the connected
PC.
NOTE: The factory configured passwords for all accounts on this device have been set
to the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is extron.
To set the date and time in Manual mode:
Click EDIT in the Date and Time panel.
1.
The editable fields are displayed (see
figure 28).
2.
Select the Manual radio button.
3. Edit the Date/Time as desired by typing in
the date and time or using the calendar and
clock icons.
4. Edit the Timezone as desired, using the
drop-down list.
5. When finished editing, click SAVE to confirm
changes or CANCEL to close the window
without making changes.
6.
Alternatively, click SYNC TO PC to set the
date and time according to your PC.
To set the date and time in sync to NTP
servers mode:
Click EDIT in the Date and Time panel. The
1.
editable fields are displayed (see figure 29).
2. Select the Sync to NTP Servers radio
button.
3. Click in an NTP Server field and enter the
IP address or host name of a desired NTP
Server.
4. When finished editing, click SAVE to confirm
changes or CANCEL to close the window
without making changes.
5. Alternatively, click SYNC TO PC to set the
date and time according to your PC.
To sync the date and time with your PC:
Click SYNC TO PC to set the date and time
according to your PC.
3
FOX3 T 101 Transmitter and FOX3 R 101 Receiver • Internal Web Page
on page 28) displays the mode used to set
Figure 28. Manual Mode
Figure 29. Sync to NTP Servers
29