Save/Load Router Configuration Templates - AutomationDirect StrideLinx SE-SL30011 User Manual

Linx
Chapter 2: StrideLinx Cloud 2.0
Device Management (cont'd)

Save/Load Router Configuration Templates

A device template can help you copy router network settings and
efficiently set up multiple routers. The template can include most of the
network parameters used to configure a new device. A few settings, such as router hardware
info, WAN connection parameters and data details for the devices behind the router, are
specific to each router and can't be included in a template.
To create a device template from an existing router
1. Go to the Fleet Manager, which is accessible via the Apps menu
corner of your StrideLinx account.
2. Open the main menu
3. Select the existing router, give the template a name, and click [Add].
To create a device template from scratch
1. Go to the Fleet Manager, which is accessible via the Apps menu
corner of your StrideLinx account.
2. Open the main menu
3. Select Create new, give the template a name and device type, and click [Add].
4. Enter the parameters you wish to include in the template. The template can include most
of the parameters used to configure a new device. A few settings, such as router hardware
info and WAN connection parameters, are specific to each router and can't be included
in a template.
To apply a device template to a router
1. The router must be registered to your company and online. First go through the initial
setup in the Getting Started section if necessary.
2. Go to the Fleet Manager, which is accessible via the Apps menu
corner of your StrideLinx account.
3. Open the main menu
4. Go to More
5. Select a template, then select which types of settings you want to apply, and load settings.
6. You have now made the changes in StrideLinx Cloud, but these are not yet active in your
device. Click [Push config to device] in the top right corner for them to take effect.
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual
, select Device templates
, select Device templates
, select Devices
and select [ Load device template].
, then click Add template.
, then click Add template.
, then click the name of your router.
1st Edition Rev. C
Online Help
in the top right
in the top right
in the top right
2-28