Wan (Internet) Settings, Cellular Network - AutomationDirect StrideLinx SE-SL30011 User Manual

Linx
Chapter 2: StrideLinx Cloud 2.0
Update Router Settings (cont'd)

WAN (Internet) Settings, Cellular Network

The router's WAN configuration determines how the router connects to
StrideLinx Cloud. Depending on your router model, you can configure it
to connect via a wired, wireless, or cellular network.
If the router has more than one connection available (e.g., wired and wireless), you can set
up multiple connection types for redundancy. To do so, see
(Failover)
If your router is currently offline
1. Follow the steps on pages 2-8 through 2-12 to create a config file and register your
router. These steps will not register your router again, as it is already registered, but this
wíll apply the configuration file settings to the router.
2. In the Fleet Manager menu, select Devices
3. Click the dropdown arrow beside [Push config to device] in the upper right of the
screen, and select [Import config from device].
If your router is currently online
1. In the Fleet Manager menu, select Devices
2. Expand the Network
3. Enter the provider's APN and the SIM card's PIN code (if applicable). The APN is
established by your service provider.
Standard APNs:
* See Chapter 1 for more information on setting up your SIM card and cellular service.
4. You have now made the changes in StrideLinx Cloud, but these are not yet active in your
device. Click [Push config to device] in the top right corner for them to take effect.
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual
on page 2-20.
options and go to [WAN].
AT&T: m2m.com.attz
Fallback WAN Connections
, then click the name of your router.
, then click the name of your router.
T-Mobile: fast.t-mobile.com Verizon*: vzwinternet
1st Edition Rev. C
Online Help
2-19