Getting Started With Stridelinx Cloud 2.0; Overview Of The Steps; Create An Account - AutomationDirect StrideLinx SE-SL30011 User Manual

Linx
Chapter 2: StrideLinx Cloud 2.0

Getting Started With StrideLinx Cloud 2.0

We'll assume you have purchased a StrideLinx VPN Router, and have wired it up using the
instructions in Chapter 1. Now you're ready to get started using the StrideLinx Cloud at
https://www.StrideLinx.com.
We'll walk you through the basics here. At the end of this section, you should have simple
and secure remote access to your equipment through the StrideLinx Cloud. We'll cover more
advanced settings later in the chapter.
If you are new to the StrideLinx site, a "Getting Started" button will appear in the lower left
corner of the screen, and will guide you through a tour of the site features and some common
tasks. The button will go away when all its activities have been completed, or you can dismiss
it at any time.
If you need help with any steps along the way, the StrideLinx Cloud 2.0
Online Help
Support Portal is available at support.stridelinx.com. Click on the
"Online Help" link to the right of some of the steps for direct access to
that topic in the support portal.
Additional help resources are available in the Resource Center, which is accessible by users
with admin rights, as discussed further on page 2-50 of this chapter.

Overview of the Steps

To get started we need to go through the following steps:

Create an account

Set up your Router
Connect to your
Machine
2-6
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual 1st Edition Rev. C