Linx
Chapter 4: Data Logging
Activate Cloud Logging in Fleet Manager
You can purchase a Cloud Logging license from automationdirect.com
and activate it, or you can activate a 30-day free trial for a single device in
your company to give it a test run and see if Cloud Logging suits your needs.
1.
Go to the Fleet Manager, which is accessible via the Apps menu
corner when logged into your StrideLinx account.
2.
Open the main menu
3.
Go to Licenses
NOTE: The Cloud Logging free trial is available for one router per company.
Now that you've activated your license or started your Cloud Logging trial, you're ready to set
up a data source.
More options for managing your Cloud Logging license are covered later in this chapter, or at
the Online Help link above.
Set Up a Data Source
The second step in Cloud Logging is setting up a data source. This is
done by selecting a communication protocol and defining the variables.
The specific steps will vary slightly depending on the selected communication protocol. The
table below lists the supported protocols, with a link to the Online Help page with details for
setting up each protocol.
Protocol
Modbus TCP/IP
Siemens S7
Ethernet/IP
OPC-UA
MELSEC Communication
Protocol
BACnet/IP
Universal Robots
Digital Input
SMTP
LoggerAPI
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual
, select Devices
and click [Start trial] in the Cloud Logging section.
Data Source Types
https://support.stridelinx.com/hc/en-us/articles/360019030157-Modbus-TCP-IP
https://support.stridelinx.com/hc/en-us/articles/360019145098-Siemens-S7
https://support.stridelinx.com/hc/en-us/articles/360019029957-Ethernet-IP
https://support.stridelinx.com/hc/en-us/articles/360019030337-OPC-UA
https://support.stridelinx.com/hc/en-us/articles/360019146238-MELSEC-Communication-Protocol
https://support.stridelinx.com/hc/en-us/articles/360019146318-BACnet-IP
https://support.stridelinx.com/hc/en-us/articles/360019146398-Universal-Robots
https://support.stridelinx.com/hc/en-us/articles/360019146138-Digital-Input
https://support.stridelinx.com/hc/en-us/articles/360019146438-SMTP
https://support.stridelinx.com/hc/en-us/articles/360019030697-LoggerAPI
in the left menu, and select your router.
Online Help Link
1st Edition Rev. C
Online Help
in the top right
Online Help
4-3
Need help?
Do you have a question about the StrideLinx SE-SL30011 and is the answer not in the manual?
Questions and answers