Set Up Your Stridelinx Vpn Router - AutomationDirect StrideLinx SE-SL30011 User Manual

Linx
Chapter 2: StrideLinx Cloud 2.0
Getting Started:

Set Up your StrideLinx VPN Router

Now that you have your personal user account and it is associated with a
company, you are ready to get your StrideLinx router connected.
To set up the StrideLinx VPN Router, we'll create a configuration file, then transfer it to the
router using the USB flash drive.
NOTE: The router will be registered to the company you are logged into when creating the configuration file.
Before you Begin:
Here's what you'll need to get your StrideLinx VPN Router set up:
• a StrideLinx user account, set up in the previous step
• a StrideLinx VPN Router, with power
• a means to connect the router to the internet (wired, Wi-Fi, or cellular)
• physical access to the StrideLinx VPN Router for its initial setup
• a USB flash drive, formatted as FAT/FAT32
• a PC with internet access and a USB port
Choose a connection type
There are three possible ways to connect the router to StrideLinx Cloud 2.0, depending on
which StrideLinx VPN router model you have: a wired, wireless or cellular connection.
Choose one of the methods for now, but note that you can change the connection method
later, and even add backup connections to use in case the primary method fails.
NOTE: All models can be configured to connect to the internet via wired connection. On the 4G models and WiFi
model, set up your preferred primary internet connection method now; a fallback connection method for WAN
redundancy can be configured through the StrideLinx Cloud after the initial setup is complete. If a WiFi model is
configured to use a wired WAN connection, its WiFi connection may be configured as a wireless access point.
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual
Create an
account
Wired
Set up your
Router
Wireless
1st Edition Rev. C
Connect to your
Machine
Online Help
Cellular
2-8