Servers & Domains; Ports & Protocols; Mac Or Ip Address Filtering - AutomationDirect StrideLinx SE-SL30011 User Manual

Linx
Chapter 1: Hardware
Servers & domains
The StrideLinx router connects to different servers: REST API, MQTT, and OpenVPN
servers, which include the following domains:
• *.ixon.cloud
• *.ixon.net
• *.ayayot.com (phonetic IIoT)
For your convenience, we provide a domain name that resolves to an always up-to-date IP list
of all current servers:
• whitelist.ixon.cloud.
Ports & protocols
Below is an overview of the ports and protocols that the StrideLinx router utilizes.
Direction
Outbound
Outbound
Outbound
1. The very first packet may be considered unencrypted as the OpenVPN handshake takes place prior to the TLS handshake. For
this reason an exception may be required on firewall rules that block non-SSL traffic over SSL ports.
2. Only used when stealth mode is activated for connectivity via a censored internet connection (e.g. when located in China).
3. DNS requests are often handled by local DNS servers. In those cases the listed DNS port can be ignored.

MAC or IP Address Filtering

Your local network may be configured to only allow internet access to specific devices, based
on the MAC address or IP address. The MAC address can be obtained from the label on
the side of the StrideLinx router or in the Devices Info tab of your StrideLinx account. The
IP address can be set to a static IP address. However, by default the IP address is set to be
obtained automatically via DHCP.
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual
StrideLinx Router Ports and Protocols
Port Transport
443
8443
(2)
53
(3)
TCP & UDP
TCP HTTPS, MQTT/TLS, OpenVPN
TCP
1st Edition Rev. C
Application
(1)
HTTPS
DNS
1
1-20