Activate Cloud Notify In Fleet Manager; Set Up A Data Source - AutomationDirect StrideLinx SE-SL30011 User Manual

Linx
Chapter 5: Cloud Notify

Activate Cloud Notify in Fleet Manager

You can purchase a Cloud Notify license from automationdirect.com and
activate it, or you can activate a 30-day free trial for a single device in your
company to give it a test run and see if Cloud Notify suits your needs.
1. Go to the Fleet Manager, which is accessible via the Apps menu
corner when logged into your StrideLinx account.
2. Open the main menu
3. Go to Licenses
NOTE: The Cloud Notify free trial is available for one router per company.
Now that you've activated your license or started your Cloud Notify trial, you're ready to set
up a data source.
More options for managing your Cloud Notify license are covered later in this chapter, or at
the Online Help link above.

Set Up a Data Source

The second step in Cloud Notify is setting up a data source. This is done
by selecting a communication protocol and defining the variables. The
specific steps will vary slightly depending on the selected communication protocol. The table
below lists the supported protocols, with a link to the Online Help page with details for
setting up each protocol.
Protocol
Modbus TCP/IP
Siemens S7
Ethernet/IP
OPC-UA
MELSEC Communication
Protocol
BACnet/IP
Universal Robots
Digital Input
SMTP
LoggerAPI
StrideLinx™ Cloud 2.0 Industrial VPN Routers User Manual
, select Devices
and click [Start trial] in the Cloud Notify section.
Data Source Types
https://support.stridelinx.com/hc/en-us/articles/360019145738-Modbus-TCP-IP
https://support.stridelinx.com/hc/en-us/articles/360019145078-Siemens-S7
https://support.stridelinx.com/hc/en-us/articles/360019029917-Ethernet-IP
https://support.stridelinx.com/hc/en-us/articles/360019145978-OPC-UA
https://support.stridelinx.com/hc/en-us/articles/360019146218-MELSEC-Communication-
Protocol
https://support.stridelinx.com/hc/en-us/articles/360019030577-BACnet-IP
https://support.stridelinx.com/hc/en-us/articles/360019146378-Universal-Robots
https://support.stridelinx.com/hc/en-us/articles/360019030477-Digital-Input
https://support.stridelinx.com/hc/en-us/articles/360019030657-SMTP
https://support.stridelinx.com/hc/en-us/articles/360019146458-LoggerAPI
in the left menu, and select your router.
Online Help Link
1st Edition Rev. C
Online Help
in the top right
Online Help
5-3