Leds And Interfaces; Figure 2-2: Leds And Interfaces; Table 2-3: Leds; Table 2-4: Interfaces - Baicells Nova230i Installation Manual

Nova230i Outdoor 2x500 mW eNodeB Installation Guide

2.2 LEDs and Interfaces

Figure 2-2, Table 2-3, and Table 2-4 explain the eNB's LED status indicators and interfaces.

Figure 2-2: LEDs and Interfaces

Table 2-3: LEDs

LED Color
PWR Green
ACT Green
RUN Green
ALM Red

Table 2-4: Interfaces

Interface Name Description
ETH/POE+ RJ-45 interface (FE/GE)
Used for power supply, debug or data backhaul/maintenance
PoE++, complies with IEEE 802.3bt standard
Status
Steady on
OFF
Steady on
OFF
OFF
Fast flash: 0.1 s on, 0.1 s off
Slow flash: 1 s on, 1 s off
Steady on
OFF
12
Description
Power is on
No power supply
The cell is activated
The cell is deactivated
No power input or device fault
The device is starting up
The device is running normally
Hardware alarm
No alarm