Nova436Q Outdoor 4x1W Two-Carrier TDD eNodeB Installation Guide
2.2 LEDs and Interfaces
Figure 2-2, Table 2-3, and Table 2-4 explain the eNB's LED status indicators and interfaces.
Figure 2-2: LEDs and Interfaces
Table 2-3: LEDs
LED
Description
PWR
Green
CELL2
Green
CELL1
Green
ALM
Red
Table 2-4: Interfaces
Interface
Description
PWR
Power supply: +48 V (+42 V to +60 V) DC
Optical backhaul interface (SFP) to connect to the external transmission network, used
OPT
for data backhaul
ETH
RJ-45 interface (GE), used for debugging or data backhaul
Port for the optional external Global Positioning System (GPS) antenna, N-female
GPS
connector
ANT
Port for external RF antenna, N-female connector
Status
Steady on
OFF
Fast flash: 0.125 s on, 0.125 s off
Slow flash: 1 s on, 1 s off
Fast flash: 0.125 s on, 0.125 s off
Slow flash: 1 s on, 1 s off
Steady on
OFF
Description
Power is on
No power supply
CELL 2 inactive
CELL 2 activated
CELL 1 inactive
CELL 1 activated
Hardware (e.g., VSWR) alarm
No alarm
13