Leds And Interfaces; Figure 2-2: Leds And Interfaces; Table 2-3: Leds; Table 2-4: Interfaces - Baicells Nova430i Installation Manual

Nova430i Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide

2.2 LEDs and Interfaces

Figure 2-2, Table 2-3, and Table 2-4 explain the eNB's LED status indicators and interfaces.

Figure 2-2: LEDs and Interfaces

Table 2-3: LEDs

LED Color
PWR Green
CELL1 Green
CELL2 Green
ALM Red

Table 2-4: Interfaces

Interface Name Description
ETH/POE+ RJ-45 interface (FE/GE)
Used for power supply, debug or data backhaul
PoE++, complies with IEEE 802.3bt standard
Status
Steady on
OFF
OFF
Fast flash: 0.1 s on, 0.1 s off
Slow flash: 1 s on, 1 s off
OFF
Fast flash: 0.1 s on, 0.1 s off
Slow flash: 1 s on, 1 s off
Steady on
OFF
12
Description
Power is on
No power supply
CELL1 is inactive
CELL1 is deactivated
CELL1 is activated
CELL2 is inactive
CELL2 is deactivated
CELL2 is activated
Hardware alarm
No alarm