Table of Contents
Advertisement
Nova230i Outdoor 2x500 mW eNodeB Installation Guide
Overview
1
1.1 Introduction
The Baicells Nova230i (Figure 1-1) is a low-power outdoor eNodeB (eNB). This 2x500 mW microcell
eNB is especially designed for tightly clustered pockets of customers, coverage holes, and edges
of your network. The design also enables opportunistic micro-targeting, like use in RV parks,
marinas, and high-density dwellings such as townhomes and apartments. This eNodeB can be
used by operators to improve capacity and throughput while eliminating existing dead zones.
Nova230i supports LTE technology and operates in Time Division Duplexing (TDD) mode.
Nova230i can be paired with self-installed indoor Customer Premise Equipment (CPE), and this
microcell is perfect for clusters of cameras, such as those used at traffic intersections, and other
devices for private network operators.
Figure 1-1: Nova230i eNB
7
Advertisement
Table of Contents
