Removing And Replacing The Main Battery - Keysight N9912A Service Manual

Repair and Replacement Procedures

Removing and Replacing the Main Battery

Removing and Replacing the Main Battery
Tools Required
None
Refer to
disposing of the old battery.
Replacing the Main Battery
1. Disconnect the power cord.
2. Remove the battery compartment door by pushing in on the detent and
3. Note the orientation of the battery for installation of the replacement.
4. Remove the old battery and install the new battery in the battery
5. Reinstall the battery compartment door by aligning it in position and then
Figure 7-1 Replacing the Main Battery
7-6
"Battery Disposal" on page 1-8
then sliding the door downwards.
compartment.
sliding it upwards until an audible click is heard.
for important instructions on
Keysight N9912A Service Guide