Repair and Replacement Procedures
Assembly Replacement Sequence
Assembly Replacement Sequence
The following steps show the sequence that you should follow to replace an
assembly in the network analyzer.
Step 1. Identify the faulty group. Begin with
Step 2. Order a replacement assembly. Refer to
Step 3. Replace the faulty assembly and determine what adjustments are necessary.
Refer to
Step 4. Perform the necessary adjustments. Refer to
Adjustments."
Step 5. Perform the necessary performance tests. Refer to
Adjustments."
7-4
"Post-Repair Procedures"
Chapter 4, "Troubleshooting."
Chapter 6, "Replaceable Parts."
in this chapter.
Chapter 3, "Tests and
Chapter 3, "Tests and
Keysight N9912A Service Guide