Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual page 250

System board and components
Concluding steps
▶
"Installing a riser module" on page
▶
"Installing the CX2550 M6 or CX2560 M6 server node" on page
▶ If applicable, reconnect all external cables.
▶
"Switching on the server node" on page
▶
"Enabling the boot watchdog" on page
▶ If applicable,
"Resuming BitLocker functionality" on page
Software configuration
In order to install the ESXi to the Dual microSD 64GB Enterprise, the VMware
ESXi installer CD is required. To obtain the ESXi installer CD by purchasing the
OEM Media Kit, or downloading the ESXi Custom Image ISO file from the
VMware website and burn the image to the CD.
https://www.vmware.com/go/download-vsphere
Install the ESXi to the Dual microSD 64GB Enterprise by following the steps
below:
▶ Disconnect all storage devices from the server beside the Dual microSD
64GB Enterprise.
▶ Power on the server. Once the server has been started, then enter the BIOS
setup menu and select the DVD drive as primary boot device.
▶ Insert the CD into the DVD drive and reboot the server. The server will boot
from the installer CD.
▶ Follow the on-screen instructions to install the ESXi. When the installation is
complete, you will be asked to reboot the server.
▶ While the server is rebooting, enter the BIOS setup menu again and select
the Dual microSD 64GB Enterprise as primary boot device.
The installation of the ESXi to the Dual microSD 64GB Enterprise is complete.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
250
51.
73.
Upgrade and Maintenance Manual
59.
81.
57.