Reconfiguring The Backup Software Solution - Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual

▶ Select the status menu of the desired component:
▶ Select CPU Status for CPUs.
This option is only available for multi-processor systems.
▶ Select Memory Status for memory modules.
▶ Select PCI Status for expansion cards.
▶ Reset replaced components to Enabled.
▶ Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.2.7

Reconfiguring the backup software solution

This task only applies to Japan.
Disabling backup drives
Depending on the backup software solution, it may be necessary to disable or
delete the backup drive from the backup software drive list and reconfigure
backup jobs after completing the maintenance task.
More information on suitable backup software solutions and related
documentation is available from the Fujitsu web pages.
Re-enabling backup drives
If a backup drive has been disabled or deleted from the backup software drive
list (see "Removing backup and optical disk media" on page
re-enabled to complete the maintenance task.
▶ Re-enable backup drives and revise backup software settings and cronjobs.
More information on suitable backup software solutions and related
documentation is available from the Fujitsu web pages.
Upgrade and Maintenance Manual
Basic software procedures
63), it has to be
75