Table of Contents
Advertisement
Before you start
Upgrade and Repair Units are non hot-plug components that can be ordered
separately to be installed as options (Upgrade Units) or are available to the
customer through customer self service (Repair Units).
For Japan, customer allows only upgrade. For upgrade units as
customer replaceable, see:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
Server management error messages and diagnostic indicators on the
front panel and system board will report defective Upgrade and Repair
Units as customer replaceable CSS components.
Upgrade and repair procedures involve shutting down the server node.
CAUTION
The device may be seriously damaged or cause damage if it is opened
without authorization or if repairs are attempted by unauthorized and
untrained personnel.
Components that are handled as Upgrade Units
– CPU (upgrade)
– Expansion card
– OCP module
– Flash backup units (FBU)
– Memory modules
– iRMC microSD card
– M.2 SSDs (M.2 SSDs with 80 mm and 100 mm length)
– Dual microSD 64GB Enterprise
– PCIe riser modules
CAUTION
Installing procedures involving Upgrade and Repair Units must be
performed exclusively by Fujitsu service personnel or technicians
trained by Fujitsu. Please note that unauthorized interference with the
system will void the warranty and exempt the manufacturer from all
liability.
20
Upgrade and Maintenance Manual
Advertisement
Table of Contents
